Ask Chris

Ask Chris2021-12-05T14:05:49-05:00

Electronics mounting challenge got you stumped?

Contact us.  We’ll give it our best shot!

Dear Chris: I want to stack two WorkBenches. Any advice?

June 10th, 2022|

Dear Chris: I purchased your system at Hamvention and wanted to know if you have a means of stacking another board on top of the base? Any advice? Thanks again, John in Ohio.   Dear John in Ohio: It's relatively easy to build a two-layer/double-stack WorkBench. The basic approach is: Use a WorkBench 1007 Base or 1010 Base as the

Comments Off on Dear Chris: I want to stack two WorkBenches. Any advice?

Where to get fasteners and other hardware?

December 16th, 2021|

Dear Chris: I need some small hardware for my project. What's a reliable source? Thanks again, Bruce in Pennsylvania   Dear Bruce in Pennsylvania: Every Phase Dock WorkBench comes with a good selection of hardware you need to assemble the Click/Slides, plus some other items for cable management and build a two-board tower.  The purpose of every item is described

Comments Off on Where to get fasteners and other hardware?

How to repair cracks in acrylic base or cover?

December 5th, 2021|

Dear Chris: What if I crack the Base or Cover while I'm working on it? Any suggestions? Thanks again, Steve in Montana   Dear Steve in Montana: You can crack Plexiglas and it will still be serviceable, as long as it doesn't explode/shatter into a thousand bits. There are a number of chemical solutions to repair acrylic so that it

Comments Off on How to repair cracks in acrylic base or cover?

How to enlarge holes in acrylic base?

December 5th, 2021|Comments Off on How to enlarge holes in acrylic base?

Dear Chris: I have a couple of NEMA 14 steppers that I want to mount directly to the WorkBench base.

Title

Go to Top