Arduino Slide with 2×3 Click
Mount Arduino UNO or MEGA. Use with any board with the same configuration, such as SparkFun RedBoard, Seeed Spartan IOT Edge Accelerator, or STM32 Nucleo-64 pin.
You get an Arduino Slide, a 2×3 Click, and assembly hardware.
Assembly hardware includes: 4 M2.5 hex nuts, 4 M3.0 hex huts, 4 M2.5 x 6 machine screws, 1 M2.5 x 20 machine screw as an insertion tool.
Material: ABS plastic; 3D print
When installed in the raised bosses, hex nuts enable you to firmly attach and easily remove the Arduino multiple times without causing any damage to the Slide.
The Arduino MEGA attaches to this Slide with four screws only, and has a partial overhang.
Ardunio board NOT included. Photos showing electronics are for reference only.