STM32 Nucleo-144 Slide with 2×4 Click

Mount Nucleo-144 pin or any board with the same configuration.

You get an STM32 Nucleo-144 Slide, a 2×4 Click and assembly hardware
Assembly hardware includes: 4 M2.5 hex nuts, 4 M3.0 hex huts, 4 M2.5 x 6 machine screws, 4 nylon standoffs, and 1 M2.5 x 20 machine screw as an insertion tool.
Material: ABS plastic; 3D print

When installed in the raised bosses, the nylon standoffs provide clearance for the headers on the lower side of the Nucleo board. Hex nuts enable you to firmly attach and easily remove the board multiple times without causing any damage to the Slide.

Nucleo-144 board not included. Photos of electronics are for reference only. 

Click/Slide Assembly Guide