WorkBench 1007 Starter Project Development Kit

$59.95

(2 customer reviews)

WorkBench 1007 Starter Kit

A great way to get started with your electronics, robotics or single-board computer projects.

Everything you get with the WorkBench 1007 PDK, except the Cover. 

WorkBench 1007 Starter Kit includes:


  • One 1007 Base, in choice of color
  • Four 2×3 Clicks
  • One 1×3 Click
  • One Arduino Uno Slide
  • One Raspberry Pi 2/3/4 Slide
  • One Feather/Particle Argon, Boron, Xenon Slide
  • One hardware packet

WorkBench 1007 Starter Kit Data Sheet

Kit Component Details


1007 BASE

Use to prototype, manage electronics, and transport your projects. 

 

14” x 8” x 1”
Approximate 54 sq. in. work surface
10×7 primary matrix; 9×6 secondary matrix
1/8” acrylic in choice of color

Hang by handle for easy temporary storage
Holes on legs enable more permanent mount, if desired


FOUR 2X3 CLICKS

Mount electronics using a Slide, or direct attach methods.  Clicks into the Base for easy management and layout of the project.

2x3 Click

Use with provided Slide; or mount other components.

Mounting platform: 2.53” x 3.35” (64.3mm x 85.4mm)
Material: ABS plastic; 3D-print

Use with provided Slide for Arduino or Raspberry Pi boards

Direct Mount Other Electronics

Electronics Mounting Guide


ONE 1X3 CLICK

Mount electronics using a Slide, or direct attach methods.  Clicks into the Base for easy management and layout of the project.

1x3 Click, orthogonal view

Clicks into the Base for easy management and layout of project.

Mounting platform: 1.56” x 3.35” (40mm x 85.4mm)
Material: ABS plastic; 3D-print

Use with provided Slide for Feather or Particle boards

Direct Mount Other Electronics

Electronics Mounting Guide


ONE SLIDE, ARDUINO UNO

Mount Arduino UNO, or use with any board with the same configuration, including the Arduino MEGA

Arduino UNO Slide

Mount either UNO or MEGA on this Slide.Material: ABS plastic; 3D-print
Assemble with a 2×3 Click

Assembly includes M2.5 hex nuts installed in the raised bosses; hex nuts enable you to firmly attach and easily remove PCBs multiple times without causing any damage to the Slide.

All hardware included.
Click/Slide Assembly Guide


ONE SLIDE, RASPBERRY PI 2, 3, 4

Mount Raspberry Pi 2, 3 or 4 or any board with the same configuration.

Raspberry Pi 2,3,4 Slide

When installed in the raised bosses, hex nuts enable you to firmly attach and easily remove the Raspberry Pi multiple times.

Material: ABS plastic; 3D-print
Assemble with a 2×3 Click

Assembly includes M2.5 hex nuts installed in the raised bosses; hex nuts enable you to firmly attach and easily remove PCBs multiple times without causing any damage to the Slide.

All hardware included.
Click/Slide Assembly Guide


ONE SLIDE, FEATHER/PARTICLE

Mount AdaFruit Feather 32u4 Basic, or Particle Argon, Boron or Xenon, or any board with the same configuration.  Also accepts the Adafruit FeatherWing Kit (terminal block breakout board)

Feather/Particle Slide

Mounts multiple boards with Feather, Featherwing, and Particle configurations.Material: ABS plastic; 3D-print
Assemble with a 1×3 Click

Assembly includes M2.5 hex nuts installed in the raised bosses; hex nuts enable you to firmly attach and easily remove PCBs multiple times without causing any damage to the Slide.

All hardware included.
Click/Slide Assembly Guide


ONE HARDWARE PACKET, 1007

Includes all the small hardware needed to get started with the WorkBench 1007 Starter Kit.  But, if you like, buy extra hardware from the same sources we use.

1007 Hardware Packet

  • 13 M2.5 hex nuts; for Click/Slide assembly
  • 13 M3.0 hex nuts; for Click/Slide assembly
  • 1 M2.5 x 20 screw; for Click Slide assembly
  • 13 M2.5 x 8 machine screws; attach electronics to Click/Slide assemblies
  • 4 Nylon male/female standoffs; use to build electronics tower
  • 8 Tubular standoffs; direct-attach electronics to Clicks
  • 9 #2 x 5/8” self-tapping screws; direct-attach electronics to Clicks
  • 2 8-32 x 7/16 machine screws; for cable management
  • 2 8-32 nyloc nuts; for cable management
  • 2 Cable tie saddle mounts; for cable management
  • 2 Zipties, small; for cable management

Electronics Mounting Guide
Click/Slide Assembly Guide

Additional information

Weight 24 oz
Dimensions 16 × 12 × 2 in
color

Black Gloss, Black Matte, Neon Green, Sapphire Blue

2 reviews for WorkBench 1007 Starter Project Development Kit

  1. Bruce Schreiner

    Found this system to give me flexibility for mounting and connecting Arduino and compatible boards such as the Adafruit Featherwing, ESP32, and many other boards during prototyping so that I can wire projects in process and move them between home, work, and makerspace without worrying about disconnecting anything accidentally. The clicks are flexible and inexpensive and mount standard boards but also allow for gluing or mounting things like din rail and Wago connectors to increase connectivity. Well made and delivered when processed. They makers are very responsive to requests.

    I have not found any other platforms that allow the flexibility at reasonable costs and also provide protection during travel without needing to disconnect things.

    • Barbara

      Thank you for the nice review, Bruce! Much appreciated!

  2. Matthew Greer

    I have been enjoying using this system for several months now. It is a great way to manage projects with interconnects between modules like Arduinos, Raspberry Pis, breadboards and displays. Without a system like this, my projects tend to grow unwieldy with a ton of wires on my workbench.

    The base and cover are well built and the click system works well with the base. I have added simple 3D printed modules on slides for BNC connectors and banana jacks to keep power and signal interfaces tidy and reliable. It is easy to mount these on slides or directly on clicks.

    This is an innovative product for makers, students, experimenters and others — well done!

    • Barbara

      Thanks for your comments Matthew! We’re happy to hear how well it is working for you.

Add a review

Title

Go to Top