WorkBench 1007 Project Development Kit

WorkBench 1007 V2.0 is the only Base compatible with the Phase Dock Integrated Organizer. Use this Base to prototype, manage electronics, and transport your projects.

Choice of colors:

• Black Matte – easy to photograph; fingerprint resistant
• Neon Green – edgy and eye-popping
• Sapphire – transparent, gem-like, sophisticated

Covers protect your work from pets, kids, dust, and other environmental factors. Covers make projects easily and safely portable.

Usage Tips:

• Backpack proven
• Ample space for wire or power cable through-access
• Ventilation helps prevent electronics over-heating
• Holes on Covers align with Base; the Cover can be bolted to the Base for extra security

Tips on using the Cover

Tips to keep it looking its best

WorkBench Cover, 1007

Mount Arduino UNO, or use with any board with the same configuration, including the Arduino MEGA and many ESP32 breakout boards.

Specifications:

• Material: ABS plastic; 3D-print
• Assemble with a 2×3 Click

Usage Tips:

• When installed in the raised bosses, hex nuts enable you to firmly attach and easily remove the Arduino multiple times.
• All hardware included. Click/Slide Assembly Guide

Mount Raspberry Pi or any board with the same configuration.

Specifications:

• Material: ABS plastic; 3D-print
• Assemble with a 2×3 Click

Use Tips:

• When installed in the raised bosses, hex nuts enable you to firmly attach and easily remove the Raspberry Pi multiple times.
• All hardware included. Click/Slide Assembly Guide

Raspberry Pi Slide, orthogonal view

Mounts any board with Feather, Featherwing, and Particle configurations.

Specifications:

• Material: ABS plastic; 3D-print
• Assemble with a 1×3 Click
• All hardware included. Click/Slide Assembly Guide

Use Tips:

• AdaFruit Feather 32u4 Basic
• Particle Argon, Boron or Xenon, or any board with the same configuration. 
• Adafruit FeatherWing Kit (terminal block breakout board)

Usage Tips:

• Use with Slides for Arduino, Raspberry Pi or BeagleBone Black boards.
• Consider adding a Direct-Mount Hardware Packet to this purchase. The hardware enables you to add other electronics easily without a Slide adapter.
• Fits 300 pin breadboards perfectly. Mount with sticky tape.

Click Connectors Data Sheet

Electronics Mounting Guide

WorkBench PDK Users Guide

Attach and release Clicks from the Base

Usage Tips:

• Use with Slides for Raspberry Pi Zero, AdaFruit Feather, Featherwing or Particle Argon, Boron or Xenon boards.
• Add a Direct-Mount Hardware Packet to this purchase. The hardware enables you to add other electronics easily without a Slide adapter.

Click Connectors Data Sheet

Electronics Mounting Guide

WorkBench PDK Users Guide

Attach and release Clicks from the Base

One Hardware Packet, 1007

Includes all the small hardware needed to get started with the WorkBench 1007 Starter Kit.  But, if you like, buy extra hardware from the same sources we use.

• 13 M2.5 hex nuts; for Click/Slide assembly
• 13 M3.0 hex nuts; for Click/Slide assembly
• 1 M2.5 x 20 screw; for Click Slide assembly
• 13 M2.5 x 8 machine screws; attach electronics to Click/Slide assemblies
• 4 Nylon male/female standoffs; use to build electronics tower
• 8 Tubular standoffs; direct-attach electronics to Clicks
• 9 #2 x 5/8” self-tapping screws; direct-attach electronics to Clicks
• 2 8-32 x 7/16 machine screws; for cable management
• 2 8-32 nyloc nuts; for cable management
• 2 Cable tie saddle mounts; for cable management
• 2 Zipties, small; for cable management