WorkBench 1010 Project Development Kit
More work surface for larger projects
1010 Cover with Base
1010 Cover with Base protects and makes projects portable.
WorkBench 1010 Base
1010 Base, room for your largest projects.
1010 Cover
Ample space for wire or cord through-access. plus good ventilation.
2x3 Click, orthogonal view
Place the small Breadboard where you want with the Click connector.
Arduino UNO Slide
Mount either UNO or MEGA on this Slide.
WorkBench 1010 Project Development Kit
$96.95
More work surface for larger projects.
WorkBench 1010 Project Development Kit includes:
- One 1010 Base, Matte Black
- One 1010 Cover, Clear
- Two Arduino Slide adapters
- One Raspberry Pi 2/3/4 Slide adapter
- One Feather/Particle Argon, Boron, Xenon Slide adapter
- Five 2×3 Click connector
- One 1×3 Click connector
- One hardware packet
Description
Kit Component Details
1010 BASE
Use to prototype, manage electronics, and transport your projects.
Specifications:
- Overall dimensions: 14” x 10” x 1”
- Work surface dimensions: approximate 81 sq. in.
- Matrices: 10×10 primary matrix; 9×9 secondary matrix
- Material: Black matte 1/8” acrylic
Usage Tips:
- Accelerate prototyping and project building
- Holes on legs align with Cover; screw together for security.
- Hang by handle for easy temporary storage.
- Holes on legs enable more permanent mount, if desired.
WorkBench 1010 Base
1010 COVER
Protects and makes projects easily and safely portable.
Specifications:
- Overall dimensions: 10″ x 10″ x 3.5″
- Material: Clear 3/32″ acrylic, gloss
- Approximately 2.5″ clearance between Base and Cover when attached
Usage Tips:
- Ample space for wire or cord through-access.
- Ventilation to prevent electronics over-heating.
- Holes on sides align with Base; screw Cover to Base for extra security.
Demo Video: Using the Cover
WorkBench Cover, 1010
TWO SLIDE adapters, ARDUINO UNO
Mount Arduino UNO, or use with any board with the same configuration, including the Arduino MEGA and ESP32 breakout boards.
Specifications:
- Material: ABS plastic; 3D-print
- Assemble with a 2×3 Click
Usage Tips:
- When installed in the raised bosses, hex nuts enable you to firmly attach and easily remove the Arduino multiple times.
- All hardware included. Click/Slide Assembly Guide
ONE SLIDE adapter, RASPBERRY PI
Mount Raspberry Pi 2, 3, 4 or 5, or any board with the same configuration.
Specifications:
- Material: ABS plastic; 3D-print
- Assemble with a 2×3 Click
Usage Tips:
- When installed in the raised bosses, hex nuts enable you to firmly attach and easily remove the Raspberry Pi multiple times.
- All hardware included. Click/Slide Assembly Guide
ONE SLIDE adapter, FEATHER/PARTICLE
Mounts boards with Feather, Featherwing, and Particle configurations.
Specifications:
- Material: ABS plastic; 3D-print
- Assemble with a 1×3 Click
Usage Tips:
- AdaFruit Feather 32u4 Basic
- Particle Argon, Boron or Xenon, or any board with the same configuration.
- Adafruit FeatherWing Kit (terminal block breakout board)
FIVE 2X3 CLICK Connectors
Clicks into the Base for easy management and layout of project. Mount electronics using a Slide, or direct attach methods.
Specifications:
- Mounting platform: 2.53” x 3.35” (64.3mm x 85.4mm)
- Material: ABS plastic; 3D-print
Usage Tips:
ONE 1X3 CLICK connector
Mount electronics using a Slide adapter, or direct attach methods. Clicks into the Base for easy management and layout of project.
Specifications:
- Mounting platform: 1.56” x 3.35” (40mm x 85.4mm)
- Material: ABS plastic; 3D-print
Usage Tips:
ONE HARDWARE PACKET, 1010
Includes all the small hardware needed to get started with the WorkBench 1007.
1010 Hardware Packet
- 17 M2.5 hex nuts; for Click/Slide assembly
- 17 M3.0 hex nuts; for Click/Slide assembly
- 1 M2.5 x 20 screw; for Click Slide assembly
- 17 M2.5 x 8 machine screws; attach electronics to Click/Slide assemblies
- 4 Nylon male/female standoffs; use to build electronics tower
- 12 Tubular standoffs; direct-attach electronics to Clicks
- 13 #2 x 5/8” self-tapping screws; direct-attach electronics to Clicks
- 2 8-32 x 7/16 machine screws; for cable management
- 2 8-32 nyloc nuts; for cable management
- 2 Cable tie saddle mounts; for cable management
- 2 Zipties, small; for cable management
Buy extra hardware from the same sources we use.
Additional information
| Weight | 40 oz |
|---|---|
| Dimensions | 15 × 12 × 5 in |
Specifications
Data Sheet — WorkBench 1010 Project Development Kit
WorkBench 1010 Base Specifications:
- Overall dimensions: 14” x 10” x 1”
- Work surface dimensions: approximate 81 sq. in.
- Matrices: 10×10 primary matrix; 9×9 secondary matrix
- Material: Black matte 1/8” acrylic
1010 Cover Specifications:
- Overall dimensions: 10″ x 10″ x 3.5″
- Material: Clear 3/32″ acrylic, gloss
- Approximately 2.5″ clearance between Base and Cover when attached
1 review for WorkBench 1010 Project Development Kit
Add a review
You must be logged in to post a review.
Related products
-
1×5 Click
$5.99 Add to cart -
WorkBench-IO + Base
$64.95 Add to cart -
WorkBench 2820 Wallmount
$239.95 Select options This product has multiple variants. The options may be chosen on the product page -
SparkFun/Adafruit Sensor Slide with 1×2 Click
$4.99 Add to cart
Barbara –
Email review comments from the customer:
The workbench is an excellent prop when experimenting with an Arduino or similar boards. The individual parts are no longer loose on the table, but can easily be attached to the WorkBench or exchanged. In the event of a work interruption, the bench is simply put aside or shown again for further experimentation. A great time saver. Due to the size of the bench, several experimental setups can be installed at the same time.
Another advantage are the slides on which the Arduino board is first mounted before it is clicked in the Bench. This ensures that there are no short circuits on the underside due to metal sticks lying on the work table. Overall a very recommendable purchase.
This is my experience with the WorkBench. My wife or visitors passing by were immediately amazed at my attempts and let them explain what I am doing. Please bring my bad english into good shape. You can freely change or shorten the text.
Always yours
Theo Hauser, Metzingen, Germany