WorkBench-IO Starter Project Development Kit

Integrated Organizer

Find the items you need quickly: Tools and a wealth of small components easily fit into the IO.

The IO is a sturdy tacklebox with 3 to 28 compartments depending on how you arrange the dividers. 

Two permanently attached handles securely engage any V2.0 1007 WorkBench Base.

A thumb-actuated spring-release mechanism easily and quickly clips the Base onto and off of the Integrated Organizer box.

1007 Base, V2.0

Use to prototype, manage electronics, and transport your projects.

Specifications:

• Overall dimensions: 14” x 8” x 1”
• Work surface: Approximate 54 sq. in.
• Matrices: 10×7 primary matrix; 9×6 secondary matrix
• Material: 1/8” acrylic; your choice of matte black, sapphire blue, or neon green

To be clear, V2.0 is functionally no different than earlier versions for project and prototype building.  All existing Clicks, Slides and Covers will work just fine on V2.0 Bases. 

Version 2.0 of the 1007 Base adds four rectangular laser-cut holes on the sides where it engages the tangs on the HDPE handles. 

However, V1.xx Bases (i.e., the earliest versions) cannot easily be retrofitted to attach to the Integrated Organizer.

One Slide adapter, Arduino Uno

Mount Arduino UNO, or use with any board with the same configuration, including the Arduino MEGA and some ESP32 breakout boards.

Specification:

• Material: ABS plastic; 3D-print
• Assemble with a 2×3 Click connector
• All hardware included. Click/Slide Assembly Guide

Usage Tips:

• When installed in the raised bosses, hex nuts enable you to firmly attach and easily remove the Arduino multiple times.
• All hardware included. Click/Slide Assembly Guide

One Slide adapter, Raspberry Pi

Mount Raspberry Pi 2, 3, 4, 5 or any board with the same configuration.

Specifications:

• Material: ABS plastic; 3D-print
• Assemble with a 2×3 Click

Usage Tips:

• When installed in the raised bosses, hex nuts enable you to firmly attach and easily remove the Arduino multiple times.
• All hardware included. Click/Slide Assembly Guide

One Slide adapter, Feather/Particle

Mounts multiple boards with Feather, Featherwing, and Particle configurations.

Specifications:

• Material: ABS plastic; 3D-print
• Assemble with a 1×3 Click

Usage Tips:

• AdaFruit Feather 32u4 Basic
• Particle Argon, Boron or Xenon, or any board with the same configuration. 
• Adafruit FeatherWing Kit (terminal block breakout board)

Four 2X3 Click connectors

Clicks into the Base for easy management and layout of the project. Mount electronics using a Slide adapter, or direct attach methods.

Specifications:

• Mounting platform: 2.53” x 3.35” (64.3mm x 85.4mm)
• Material: ABS plastic; 3D-print

Usage Tips:

• Use with provided Slide for Arduino or Raspberry Pi boards
• Direct Mount Other Electronics
• Electronics Mounting Guide

One 1X3 Click connector

Mount electronics using a Slide adapter, or direct attach methods.  Clicks into the Base for easy management and layout of the project.

Specifications:

• Mounting platform: 1.56” x 3.35” (40mm x 85.4mm)
• Material: ABS plastic; 3D-print

Usage Tips:

• Use with provided Slide for Feather or Particle boards
• Direct mount other Electronics
• Electronics Mounting Guide

One Hardware Packet, 1007

Includes all the small hardware needed to get started with the WorkBench 1007 Starter Kit.  But, if you like, buy extra hardware from the same sources we use.

• 13 M2.5 hex nuts; for Click/Slide assembly
• 13 M3.0 hex nuts; for Click/Slide assembly
• 1 M2.5 x 20 screw; for Click Slide assembly
• 13 M2.5 x 8 machine screws; attach electronics to Click/Slide assemblies
• 4 Nylon male/female standoffs; use to build electronics tower
• 8 Tubular standoffs; direct-attach electronics to Clicks
• 9 #2 x 5/8” self-tapping screws; direct-attach electronics to Clicks
• 2 8-32 x 7/16 machine screws; for cable management
• 2 8-32 nyloc nuts; for cable management
• 2 Cable tie saddle mounts; for cable management
• 2 Zipties, small; for cable management