Two-sided linebender lets you set-up for different angles This is handy, but make sure your power supply can support the longer/double length nichrome wire.Angle stops adjusted for a wider angle bend.Small clamps can make set-up and adjustment easier. Magnetic catches are helpful, but check them for precision if necessary.Add a spring to manage the nichrome wire. You’d be amazed how much the wire expands as it heats. Without the springs, it will droop and cause an inconsistent bend.Aluminum channel used to shield the nichrome wire.ViseGrip 18SP welding clamps used to hold the workpiece. Heavy-duty, tight-pin hinges with plastic spacers keep the hinge from being sloppy, so the hinge stays consistent in the bend.